I don't normally do product reviews......especially since I'm not the best writer nor have a lot of extra time, but I am doing this review since I purchased a product from a little know company and promised them I would I would review their product and post my honest review.
What is the gear a photographer may want for 2008?
I own and have been using the Nikon D200 and just recently received the New Nikon D300. I looked into my list of “Want” items and decided to look into a GPS tagging unit for my Nikon bodies – Neither of these camera bodies have a GPS unit built-in, buy they do feature direct support for one and there is even a GPS menu on the camera itself.
After doing some research on the internet, I found there were many ways to go…..but many of the GPS Tagging units did not have the features I wanted, nor would they satisfy my needs. I was looking for a simple way to GEOTag photos without having to worry about any special software and syncing reqirements after the images were taken. Being able record GPS data directly into the EXIF data of a image SAVES TONS OF TIME as opposed to taking notes (which I never did anyway) and is a whole lot more accurate. There were two products that made my final list and after further research I decided to try a new GPS GEOTagging device, the DP-GPS N1 made by Solmeta Technologies
One main reason that I chose the DP-GPS N1 was that the N1 comes with it’s own internal rechargable battery – so it won’t suck up my cameras power!
I ordered two units and they arrived in a matter of days. My first impression is the materials and construction appear to be of high quality – I fitted the units to my D200 and D300 by the 10 pin connector – which the connection mated up perfectly (as it should). The size and weight are certainly not an issue as the units are small, very lightweight and easy to travel with. Reviewing the operation instructions via the user’s manual was straightforward. Mounting the N1’s: they are designed to sit on the hot-shoe or attach to your cameras strap. I use the hot shoe a lot for a flash remote with off camera flash so I attached the units to my cameras strap.
From the companies website:
Unique Features
●SiRF star III chipset 20 channels
●Short initial time, no setup required
●Best hotshoe and ten pin connector solution
●Easy to operate
●Small, lightweight and easy to travel with
●Compact & fashionable design
●Real time GPS information
●Build-in rechargeable battery, more than 9 hrs operating time
●Unique camera battery backup support
●Mounted on flash accessory shoe or attached to camera strap
●Support Nikon D3, D300, D2XS, D2X, D2HS & D200, Fujifilm S5 Pro
Main Specifications
Electrical Characteristics
GPS Chipset: SiRF Star III
Frequency: L1, 1575.42 MHz
C/A Code: 1.023 MHz chip rate
Channels: 20 channel
Tracking sensitivity: -159dBm
ACQUISITION RATE
Hot start: 1 sec., average
Warm start: 38 sec., average
Cold start: 42 sec., average
Reacquisition: 0.1 sec., average
ACCURACY
Position Horizontal:10meters,2D RMS
1-5 meters 2D RMS, WAAS corrected
Velocity: 0.1m/sec.
Device Size and Weight
Size: 56 (L)mmX36(W)mm X 17(H) mm
Weight: 50g
The first thing you will want to do is charge the units battery (rechargable). From my repeated test on both units, it takes approximately 2 ½ hours to fully charge the unit and you will get approximately 10 hours of continiuos usage time. Once your battery on the unit is drained you can then flip a switch to “camera” and now the unit will run off your camera battery if necessary.
Now for the excitement: First time out using a unit on my D300, cold start – WOW!, very quickly (not more than 40 seconds) a signal was locked. After that, turning the camera on and off the capture time was anywhere from 1-10 seconds. Accuracy is dead on, just as I would expect.
The beauty of this unit is that the GPS information (longitude, latitude and altitude) are inserted right into the metadata of each shot as you take them. There is no need for ANY post processing when you return to your computer. Since I use Adobe Lightroom I can take advantage of this data instantly by clicking the little GPS button in the metadata panel which will automatically take me to the location that I was shooting on Google Maps. I also use Smug Mug as my photography website (www.MLKimages.com) which is also linked to Google Maps. So after I upload new images to my Smug Mug website, Customers are able to click on a “Map This” button which will open up the gallery in Google Maps and show all the gallery images laid out on the map. Flickr users....same thing, upload you GPS embedded images to your Flickr account – Pretty Cool!
The unit has two switches. The first is the CONTROL switch which allows you to control how the unit is sync’d to work with the camera.
AUTO – In the Auto position the GPS unit will turn on and off with the camera – simple. This will probably yield the best battery life. However, each time the unit is turned on with the camera in this mode it will have to potentially acquire the satellite signal again.
ON - it stays on and connected to the GPS satellites regardless if the camera is on or not.
OFF is just that, the unit is off regardless of the camera being on or off.
Since the unit has it’s own internal battery I personally recommend the ON position if you are shooting, then moving then shooting again. If you’re going to use it off and on throughout the day, then Auto is probably best. There is a clear indicator right on top that quickly flashes red in a sequence of 3 when it is searching and blinks a slow and steady red when it has locked on. There is one additional green lamp that will light steady when the unit is being charged and will turn off when fully charged. Also when in use, the green lamp will illuminate when the battery is running low.
The second switch is POWER, which controls where the unit gets it’s….you guessed it –where it gets its power. INSIDE uses the GPS internal battery. CAMERA is using the cameras battery.
Solmeta customer service has been nothing but excellent! One item I did not like on the initial units I received was the inability to know when the battery of the unit was drained. I also was not fond of the connection of the chargers to the GPS unit. I sent an email Solmeta and offered them a few suggestions to improve the units. They sent me a reply of thanks and they would look into it. One week later I received a follow-up email saying that the changes I recommended were implemented into new units and replacments were on the way. Now I am using the renewed units and the green light will flash when the battery is low and the connection is excellent between the charger and receiver. Solmeta has also advised me that they are intorducing a new unit shortly that will have a location locking anility so when shooting indoors you will be able to lock the GPS location and embed the data into the exif info when shooting indoors - another requested and cool feature!
Enjoy and if anyone reading my review is planning on purchasing a GPS tagging unit from Solmeta, make sure you mention that you read my review.....that may offer you a small discount ;)
MLKimages
Thursday, March 20, 2008
Subscribe to:
Post Comments (Atom)
4 comments:
Hi Michael.
Very nice review of the GPS unit. Hopefully you will receive some kind of kickback from the Solmeta company down the road. You have made me interested in getting a unit my self. Very good suggestions to get the unit modified. A big cadeau to the company for listening to its customers.
On thing i was missing reading your review was the price of the unit, and maybe give it a score for different functions like start up time, batteri life, etc and an overall score.
I know you need something to compare it too, but still...
Again very nice review. Thanks for taking the time to do it.
Jan Winther
Does the unit come with any software to create webpages with all your links or do you have to use smug mug/flicker?
I have looked at another product that has software to create html pages with all your photos and link to Google maps. Great review - may tip me over to the Solmeta if the software is there.
The Solmeta unit does come with the software you are seeking - right now it does not work with RAW - jpeg only, but they menioned to me that they are working to update the software to work with RAW images. My recommendation is to use Lightroom instead - it is WAY better software and will do much much more.
Thanks for the comment.
Michael
Great blog.
I own both the Nuvi 660 and the 760, I'm writing this review for people having trouble deciding between the two as the price difference between the two products at the time of this review is about 100 dollars. I'm not going to focus on the feature differences, as that information can be easily obtained from specifications and online reviews. The 660 was a fine product back in 2005-2006, but the new 760 outdoes the 660 in practically everything, but there are some key usability fixes that make the 760 a better buy for the frequent user.
http://tinyurl.com/gnuvi760
1. 760 has much better fonts for street names than the 660. This may seem like a trivial update to some, but the 760's fonts greatly improve visibility. The 660 uses all capitalized text for street names on the map, and the font is incredibly cartoonish and unaligned, something like the scribbling Comic Sans font on the PC. The 760 uses your standard Verdana-like font with street names in capitalized and lowercase letters. The fonts on the 760 are smaller, cleaner and surprisingly much easier to read while driving. The maps end up looking professional, and not some cartoony children's video game.
2. 760 has better rendering in 3D map mode than the 660. In the 660 when you are zoomed in under 3D map mode, the roads close to your car are displayed incredibly large, so large that they run into other roads, making the zoom function essentially kind of useless for dense roads. The 760 does not oversize your roads just because you zoomed in to view smaller roads in detail. This fix is very nice for those who drive in places with dense roadways, like New York City.
3. No antenna on the 760 makes hooking up your Nuvi to the cradle one step easier. On the 660 you need to flip up the antenna before attaching the cradle. For people who park their cars on the street overnight, removing the GPS from the cradle for storage in the console or glove compartment is a must, and it's a lot easier hooking up the 760 to the cradle than the 660. It's hard to aim the 660 to its cradle in the dark as you have to align both the bottom edge and the charge port under the antenna. In the 760, the charge port is directly on the bottom of the unit; you can attach it to the cradle with one hand in the dark easily on the 760.
4. It takes the 660 a good 45 seconds on average (sometimes longer than 2 minutes) after boot up to locate the satellite on a cold start. If you have firmware 2.6 installed on the 760, the satellite acquisition time after boot up is between 10-20 seconds. After the firmware update, my 760 also holds a stronger lock to the satellites than my 660, I can get satellite lock inside my house with the 760, whereas I can't get a lock with my 660 (adjusting the antenna does very little).
5. The ability to set multiple ad hoc viapoints on the 760 means it's a lot easier creating alternate routes (very handy to avoid a specific interstate or a high traffic road). Whereas the 660 gives you just one viapoint.
UPDATE: This GPS is currently on sale at Amazon… now is your chance to buy one, if you haven’t already. You can find the product page here:
http://tinyurl.com/gnuvi760
Post a Comment